When building wheelchair ramps for any buildings, a lot of care needs to be taken. This is for the simple reason that the ramps play a very crucial role in the lives of the users and they need to feel that they are secure as they use them in and out of the building. 
When built or designed incorrectly, the ramps can cause cases of high life risks to the users and they can be termed to be hazardous. Not only is the ramp unsafe for the users but also for the installers and other persons who may prefer using them as secure ways to get in and out of the building.
Depending on the site and the size of your building, you may decide to have permanent or adjustable wheel chair ramps. When installing the permanent ramps, it is wise to consider the following issues. You should ensure that the angle of the ramp is not too steep such that it would be difficult to control the wheel chair up or down the ramp without some help. You should as well take care of the side railing that act as guards as well as the slopes and landings to ensure that they are properly done.
When installing the portable wheelchair ramps always consider the space that is available. You might find out that the ramp is too short that it ends up being too steep for the user. This will fail to deliver the desired results and it may cause problems in future. The other thing to consider is the anchoring of the portable ramp. It is important to ensure that the anchors have been installed properly and securely to eliminate cases of slippage. This will make the ramp more stable and everybody will surely enjoy using it.
What matters in the wheelchair ramps installation is the end user. It is important to ensure that they feel secure and safe when using the ramps by ensuring that they are resistant to slips, safe and secure. To enhance visibility, it is advisable that at all the entrance and exit points of the ramp, there should be clear mark of florescent tape or paints. This ensures that any person even those with visual impairment can easily figure out that a transition is about to happen. This as well keeps the mind alert throughout the journey.
When making considerations for the wheelchair ramp, it is important to remember that the easier the slope or rise the easier it will be for the users. This can be taken to be common knowledge but it may be new to other people who have never experienced a ramp. The common standard or principle that is use in ramp construction is that for every inch that the ramp rises, there needs to be one foot of the slope. Every time you are about to install the ramps remember that the users need to be in control all the time as they ascend or descend. If by any chance the wheelchair user, or any other user losses the footing, it can be a dangerous situation.
During the construction of a wheelchair ramp, great care should be taken. Ramps that are poorly designed and built incorrectly only put the user at great risk. Such can lead to a hazardous situations and even result to death. Such a ramp is not only unsafe and dangerous to the people who use the wheelchair as there are other people who are the care giver and they also use the same ramp. It is therefore important to look for a well trained and certified wheelchair ramp installer who meets the ADA guidelines. If a person feels that they would want to handle renovations for the ramp on their own, the best thing is to follow the guidelines in the guidebook.
When building your house, you will need to consider such amenities like wheel chair ramps and leave out some space for them. The length of the ramp is a consideration for any building since it requires a safe length by all means. Generally the length of the ramp will be determined by the main user and the number of times it will need to turn for it to fit in the area allowed for the ramp.
To have get standard gauge wheelchair ramps that will comfortably accommodate walkers and wheel chairs, the width can be set at one meter. For two way traffic ramps four meters width should be the minimum allowed space. The ramps should be built in a way that they can accommodate even the larger wheelchairs. It is very vital to consider the width before starting the installation since there are wheelchairs that are designed specifically for the patients comfort. The maintenance of the ramps should as well be a consideration when settling on the length of the ramp in total
The landing for the wheelchair ramps should be build in way that they are level and spacious to allow for a comfortable turn for the wheel chair. It is recommended that it should have a radius of forty eight inches. The landings should be provided for if the ramp is over two and a half feet high. Railings can as well be included in the ramps with this consideration in mind. The railings and the landing present an excellent opportunity for the person using the ramp to rest and gain some energy to move on. It is always good to keep in mind that anything can happen suddenly and even a small fall can have a huge impact on an already weak body or even damage it beyond repair.
For areas with extreme weather conditions, special considerations need to be made to ensure that the ramps are safe. Areas where there is lots of rain or snow can be very slippery hence very risky. It is important to install slip resistant floors on the ramps in such areas and be extra cautious with the angle of the slope. The main idea here is to ensure that our loved ones are very safe as they use the ramps.
Before installing the wheelchair ramps in the neighborhood, you can do some research on the best designs that you could prefer. You can go online for the search or do it manually by visiting houses in the neighborhood where ramps have been installed. You do not have to rush things where matters of daily life safety are involved. It might be very hard to correct a mistake once the ramps have been installed in your building. It might as well be very costly and time consuming where you end up spending more time than you were saving.
During the construction of a wheelchair ramp, great care should be taken. Ramps that are poorly designed and built incorrectly only put the user at great risk. Such can lead to a hazardous situations and even result to death. Such a ramp is not only unsafe and dangerous to the people who use the wheelchair as there are other people who are the care giver and they also use the same ramp. It is therefore important to look for a well trained and certified wheelchair ramp installer who meets the ADA guidelines. If a person feels that they would want to handle renovations for the ramp on their own, the best thing is to follow the guidelines in the guidebook.
Getting the right materials for the wheelchair ramps is another consideration that you should make before settling for the actual installing company. Some companies will get you some substandard materials which end up giving you substandard results on the complete ramps. The quality of materials used in the building determines the quality of the final ramp hence it should be considered. The maintenance cost of high quality ramps is relatively low and it pays in the long run considering the quality of service it give for many years. It is as well advisable to get a top notch architect to do the designing for the end product to be aesthetically appealing.
When looking for wheelchair ramps installers, look for those that have been trained and certified to do the installations under the ADA guidelines. This is a key step in ensuring that you will get the most from the installer. If you want to do it all by yourself, you can as well enroll for the classes and learn everything that it takes. You can as well purchase guidebooks that have been certified or else enroll for online classes and tutorials. At the end of the day you want to get the ramps that meet the recommended standards.
